VEHICLES

Request Estimate

SIGNS

DESIGN

Apparel

Vinyl | Decals

VEHICLES

PROMO

Full

Looking for a unique way to brand your business or project?

We design, produce and wrap in-house! We have 3M trained installers and use only the highest quality materials. From full wraps, partial wraps, fleet vehicle services and back window perforated graphics, we can help you design and execute the right look for you.

Partial

Our design experts are happy to do a free consultation and estimate of your vehicle graphic project any time! Stop by or contact us today.

Fleet

Our design experts are happy to do a free consultation and estimate of your vehicle graphic project any time! Stop by or contact us today.

Front

Back

Driver

Passenger

How to Properly Survey Vehicle for an Estimate/Design Mock Up

When sending photos for an estimate on vehicle graphics or partial/full wraps, use these guidelines to help you capture clear, straight on photos.
Detailed measurements of things like doors from seam to seam, wheel base to wheel base, as well as window width & height will also help get us in the right ball park.

*please note that while this info might get us started… we will need you to bring the vehicle in or schedule an on site survey with us to obtain exact/detailed measurements for a final price

How to Properly Care for Vehicle Graphics & Wraps

Hand washing your vehicle is the preferred method of cleaning a car wrap. If using this method, first rinse off as much dirt and grit as possible with a spray of water before using a soft, clean cloth or sponge and a wet, non-abrasive detergent to wash the vehicle. Be sure to rinse thoroughly with clean water and reduce water spotting by using a silicone squeegee to remove excess water immediately. Finish with a clean microfiber cloth.Wrapped vehicles can be run through a car wash, with a touchless system being the best choice. Use of brush car washes may cause damage to your vehicle graphic, including dulling, scratching, and lifting the edges of the film. It is also possible to pressure wash a vehicle with a graphic wrap.

According to 3M’s vehicle care guidelines, pressure washing may be used under these conditions:

Ensure the water pressure is kept below 2000 psi (14 MPa).
Keep water temperature below 180 °F (80 °C).
Use a spray nozzle with a 40-degree wide angle spray pattern.
Keep the nozzle at least 1 foot (300 mm) away from and perpendicular (at 90 degrees) to the graphic.
It is important to note that holding the nozzle of a pressure washer at an angle to graphic may lift the edges of the film.

Some other care tips to keep in mind when cleaning a vehicle with a car wrap include:

Wipe off any fuel spills immediately to avoid degrading the vinyl and adhesive.
Do no use any abrasive polishes or cutting compounds (3M does not recommend using wax or other similar coatings on vehicle graphics).
If there is wax or wax residue on the surface, remove with an all-purpose cleaner.
When using a cleaning solution, do not allow it to stand and soak; immediately rinse with clear water.
Store your wrapped vehicle indoors, in a shaded area, or under a cover whenever possible to preserve and protect the graphics. If storage in a garage is not available, consider using a cloth car cover at night to protect against dew or rain which may contain acidic pollutants.